Dangling Wire on 84'

[pillen140]

PB, let it sit, pb again, let it sit, pb again let it sit...... let it soak in real good, or you could snap a bolt trying to get it out.

 

[pillen140]

are they one sided? or do I need to hold a nut under the cab or something??

they thread into the cab itself. only need one wrench.

 

[Ranger Kip]

k, is it hard to remove from the cab? or is it just tedious?

I want to shampoo the bench and clean the tracks off, I assume there are screws that hold the bench onto the tracks right?

 

[pillen140]

k, is it hard to remove from the cab? or is it just tedious?

I want to shampoo the bench and clean the tracks off, I assume there are screws that hold the bench onto the tracks right?

its not hard or tedious.... just unbolt it. and take it out the passenger side so the steering wheel doesnt get in the way. and the seat unbolts from the frame also.

 

[Ranger Kip]

1 problem, the free side is the driver's side, there is all this shit and a barn blocking the other side.

 

[pillen140]

you can still get it out, just that the steering wheel is more in the way.

 

[Boggin]

just thought of something. snip the wire and see what goes out, if notthing goes out and all is still well just rip the wire out all together so it aint in the way anymore, and if something does give out(say glove box lamp) then cut out a big ol section so it isnt long and hanging down and splice the wire back together and tuck it up under the dash and your done

 

[Ranger Sport Honduras]

then u have to take it out from the hard way lol

 

[Ranger Kip]

kay, hoping that Eric comes over soon so I have some help =P