dana 35 torque spec

[geoffthepoolguy]

anyone know the torque spec for the wheel bearing nut on a dana 35 axle? Also, do you torque it to spec and turn back 1/4 turn?

Thanks,

Geoff

 

[CopyKat]

New bearings torque to about 30 inch/lb's while turning the rotor, this will seat them. Back off a full turn and tighten finger tight 15 in/lbs while turning the rotor again. Put the lock ring on and the outer night. Torque outer nut to 250 ft/lbs making sure the lock ring/inner nut doesn't turn.

 

[Spowerback]

torque spec for the wheel bearing nut on a dana 35 axle= finger tight wheel bearing same thing copykat