dana 35 axle

[rochhound]

i have a dana 35 in my bronco II with jeep limited slip with 4:10 ratio,ive decided to put a 8.8" rear end out of a 93 explorer ratio 3:73 ,i also bought a front punkin dana 35 with 3:73.trans is md5r. i want the higher gear hoping to get better mileage
have plenty of power and dont do aggressive rock hoppin, just dirt roads and some mud.love having 4wd with limited slip front and back,really has contoll in mud and snow.my question is i want to change (seals) ,axle and pinion in new punkin. tryed ebay to no evail im looking for vendor to just buy seals no bearings there good.
thanks steve

 

[85_Ranger4x4]

Rockauto should have them.

 

[brinker88]

Broncograveyard.com Ringpinion.com Drivetrainwarehouse.com

 

[rochhound]

thanks guys ill check them out

 

[racer1044]

Local parts stores should have them too. The advance auto parts I work at had all of them in stock. Bring the old ones in if you can though. I always recommend that so you make sure you get the right ones and everything you need.

 

[adsm08]

Um, any parts store or dealership should have them or be able to get them next day.

Also, higher gears will not get you better mileage.