• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Cheap Way to Extend Rear Brake Line


zainyD]

Well-Known Member
Joined
Sep 26, 2007
Messages
214
Vehicle Year
1996
Transmission
Manual
I have a SAS'd 96 Ranger with approximately 6" of lift in the rear and I am in need of an extended, rear brake hose. Does anybody have a part number for a longer replacement that I could find at a local auto parts store, something that bolts up without the need to modify anything? I would prefer not to have to buy an aftermarket hose if possible.

Thanks for your help!
 
should be able to buy them at just about any decent parts store, break lines are a lot cheaper then not stoping and having a hooooooooo shit moment, cost should not be a factor
 
The original brake hose is plenty long enough and is easier to find when you need to replace it. You merely need to lower the top mounting point. I cut it off and add an extension and weld it all together.
 
i know you can use f250 rear brake lines.. they just screw together
 
The original brake hose is plenty long enough and is easier to find when you need to replace it. You merely need to lower the top mounting point. I cut it off and add an extension and weld it all together.


Thats what I did with mine, and i'm running around 6" of rear lift.
 
I just bent the stock bracket down, and then ran a new brake line up to the front. I'm running 5.5" - 6" of lift.
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top