Can anyone ID (part number) this hose?

[watson]

Can anyone help me ID, with a part number, the hose in the following picture?

"9.52MM GAS/FUEL ABG 8 01".

I couldn't find it anywhere online and I can't seem to source my FSM.

This is for a 1998 Ford Ranger 4.0.

 

[97RangerXLT]

you can probably get away with going to autozone/oreilly's/advanced and asking for a specified length of that hose. probaly won't be more than a few bucks for two feet of it, which should be enough for your project.

If nothing else, take it off the truck and take it with you when you go in, and they will probably find an SAE version that will work.

I would imagine that if it is fuel rated and the right size you will have no issues. might want to get new hose clamps too while you are at it

AJ

 

[kcm1582]

3/8" is sae equivalent. As long as it is clamped on and doesn't have special ends then I would think regular line from the parts store should work fine.

 

[adsm08]

Mind telling us what that line is for exactly? This is kind of a narrow angle shot.

 

[88_Eddie]

3/8" is sae equivalent. As long as it is clamped on and doesn't have special ends then I would think regular line from the parts store should work fine.

this

go to autozone, they have spools of it in the back that they sell by the foot, just make sure it's fuel line and get the length you need.