Welcome Visitor! Please take a few seconds and 
Curious Hound
I know a guy with a website
TRS Forum Moderator
TRS Event Staff
⭐Supporting Member
TRS Event Participant
TRS 20th Anniversary
TRS 25th Anniversary
VAGABOND
U.S. Military - Veteran
GMRS Radio License
- Joined
- Feb 7, 2016
- Messages
- 18,622
- Points
- 601
- Age
- 61
- City
- Wellford, SC
- State - Country
- SC - USA
- Other
- 2002 F250, 2022 KLR 650
- Vehicle Year
- 1993
- Vehicle
- Ford Ranger
- Drive
- 4WD
- Engine
- 3.0 V6
- Transmission
- Manual
- Total Lift
- 6"
- Tire Size
- 35"
- My credo
- In theory, theory and practice are the same. In practice, they are different.
hey, y'all!
I am getting ready to order a bunch of stuff for my lift and axle upgrade project. While changing gears and adding a lunchbox locker to my new rear axle, I would like to install a c-clip eliminator kit if I can do it for a reasonable price. I want to just add the bearing kit to my existing axles if possible, but am having trouble finding the right kit to order.
The axle is a 31-spline 8.8 from a 2002 FX4. All the kits I am finding seem to be for the narrower 28-spline axles or they include new axles which makes them a lot more expensive. I believe the bearing ID's need to be 1.625", but have not measured them yet. Everything I find is for 1.4".
Does anyone here have an actual confirmed part number for what I'm looking for?
I am getting ready to order a bunch of stuff for my lift and axle upgrade project. While changing gears and adding a lunchbox locker to my new rear axle, I would like to install a c-clip eliminator kit if I can do it for a reasonable price. I want to just add the bearing kit to my existing axles if possible, but am having trouble finding the right kit to order.
The axle is a 31-spline 8.8 from a 2002 FX4. All the kits I am finding seem to be for the narrower 28-spline axles or they include new axles which makes them a lot more expensive. I believe the bearing ID's need to be 1.625", but have not measured them yet. Everything I find is for 1.4".
Does anyone here have an actual confirmed part number for what I'm looking for?
