Boggin
Well-Known Member
- Joined
- Nov 3, 2007
- Messages
- 5,711
- Transmission
- Manual

i dont know why im doing this,
but im letting my brother have the bronco, even trade for the ranger
_________________________________________
Bronco II | Ranger
2.9 2.9
auto 5speed
4x4 4x2

no lift 3" body lift
Roll bars
brush guard Push bar
{not installed}
235/75s 235/75s
_________________________________________
i do have an extra transmission, transfercase, front diff, front beams, everything i need to make ranger 4x4 IF i ever get around to doing that
for now with the ranger i would just lock the rear, get leveling kit, maybe a lift, 32s, a good paint job, something like this:

MS Paint ftw
or maybe leave her black and put the red coming around the front and the stripe {where the black is}
heres the bronco





and heres the ranger




and yes i will still have a 4x4, im in the process of gettin the maxda {potato tits} going again


im gonna miss my bronco
but she does have a horrible transmission leak, i burn about 2 litres in 15 minutes and she got a really bad noise in the front end somewhere, and she only goes in 4x4 half the time, and the transmission is about to go
and the ranger hasnothing wrong with her, the clutch gets air in it sometimes so you gotta pump it about a hundred times to get it to work every now and then
and she has been sitting all winter and my brother wants me to put the original front end on the bronco so when i get that done i guess the deal is done and ill get the ranger going
that is all..just felt like updating yall