bronco 2 with top cut off, anyone done it?

[89DANGERANGER]

such as, has anyone hacked the rear off like the removal tops on the fullsize broncos ? any pictures its an idea for mine

 

[BlackBII]

It has been done many times

http://www.broncoiicorral.com/choptop.htm

http://www.google.com/cse?cx=partne...g_searchinfo=1&photoplog_searchquery=chop+top

 

[Snoranger]

There's a lot of them on here. Search "chop top".

 

[scionguy3809]

I just did this look at my build post

 

[89DANGERANGER]

Any pictures? I searched for the thread

 

[RICO9]

here's a few pics of mine. mine's got a sealed cab though.

 

[89DANGERANGER]

is that the bronco2 hatch as a tailgate?

 

[country0001]

Go to the RBV's uner constuction and you'll find a bunch

 

[RICO9]

is that the bronco2 hatch as a tailgate?

Yes. it doesn't fold down like a tail gate but it does pop on and off easily.

 

[scionguy3809]

still working on mine as i just choped mine off

 

[n_grimm]

I recently chopped mine. I welded the rear hatch section to the back of the cab. Then I built a rigid soft top metal frame that bolts or clamps to the bed rails which is based on pics kindly provided by 84BroncoII on this forum. Haven't made the soft top yet but hopefully soon. I cut the hatch in two using lower as a tailgate and the upper with the glass can serve as a back window. If I can get the rear glass shortened a little, I'll add a frame at the bottom that a soft tonneau will snap to. Not sure how it will hold up but I drilled a hole in each end of the fiberglass tailgate and slid a 1 1/2" piece of conduit all the way thru which fits perfectly over F150 hinges. I cut a slot out of one end of the conduit so the tailgate can be removed just like a Ranger. Still have a lot of work to do before it is completed.