Bronco 2 compatibility questions.

[Mortifiedocalot]

Alright, so long story short I broke 2 side windows (the passenger door, and the large side window) and a side mirror on one side. I was wondering what model Bronco 2s could replace (it's an 88, I think that's gen 1) these windows, and I was also wondering if the panel side windows will only fit on one side (as in, a right side window replacing a left side one).

 

[chrwilkins30]

IIRC, 86-90 since they are bolted on. unlike previous.

 

[alwaysFlOoReD]

IIRC, 86-90 since they are bolted on. unlike previous.

Yes there are two different styles that I've seen, one 'glued' in place, the other bolted in. With a little work I think the bolt in would go where the glue in one was. As far as side to side fitment, I don't know. It seems like they should, if I had designed them they would be interchangeable.
Good luck,

Richard

 

[TexCaliBII]

84-85 are glued in and 86-90 are bolt in and no they are not swappable side to side, they are different. Doors are swappable from 85-90 but it is better to match manual to manual and electric to electric as 89/90 electric doors are wired up differently than the 1st gen electric doors.