Bronco 2 4.0 swap from an 03 ranger

[Asagarner22]

Ok so I have a 03 ranger 4.0 4wd that unfortunately was tboned. Cab is smashed beyond repair. I recently purchased a 1990 bronco 2. What all would need to be done to swap this 4.0 and trans into my bronco. Can I convert this trans for 2wd by just installing a output shaft housing? I know I would need computer, harness, cluster, and inertia switch. What else would need done?

 

[franklin2]

Didn't the 03 have a returnless fuel system? If it did, all the fuel system would have to be converted over on the old 1990 to the newer system. Most all Ford transmissions I am familiar with require a complete teardown to convert from 4x4 duties to 2wd duties or 2wd to 4x4.