Brite Box

[ajmiller]

does anyone have this? can i see pics? was wondering if it actually works good. maybe considering getting one

thanks

 

[ajmiller]

or maybe this???

http://www.hidkit.com/Ford-Ranger-HID-Kits/

 

[daniel3507]

are you looking for more driving light or just for more lights to flick on when on a dark road with no other cars?

 

[ajmiller]

just driving...im already getting hella 500's i just wanted better headlights

 

[daniel3507]

your best bet would just be those headlights you got and some auxiliary driving lights mounted down lower to light it up wider

 

[Crane]

your best bet would just be those headlights you got and some auxiliary driving lights mounted down lower to light it up wider

Yea, I have some Hella 500 fog lights that are street legal because they have one of those metal shields over the bulb, I have them aimed a bit below the normal headlights and it helps a lot

 

[ajmiller]

ya im just gonna get a light bar and mount 500's on them.

thanks guys..

 

[daniel3507]

be sure and adjust them properly so they dont blind other drivers

 

[Original_Ranger84]

you don't need the bright box... all it does is leave your low beams on when your high beams are on. You can simply wireup a relay between the high and lows for the same effect.

Look at the high beam upgrade then read the bright box thing
http://www.therangerstation.com/tech_library/hibeams.html
I did this on my trucks

 

[Beefy'sB2300]

you don't need the bright box... all it does is leave your low beams on when your high beams are on. You can simply wireup a relay between the high and lows for the same effect.

Look at the high beam upgrade then read the bright box thing
http://www.therangerstation.com/tech_library/hibeams.html
I did this on my trucks

Has anyone had any wiring problems running High and Low beams together? just wondering.

 

[Original_Ranger84]

I haven't in the 2 years I have ran it. The only problem I would think you could have would be heating up the headlamp too much with both running but I haven't had a problem there either. Wiring shouldn't be an issue because the high and low beam have seperate circuits and seperate wires going to them. and the relay bypasses the high/low beam switch in the cab so that shouldn't overload.