breaking o2 sensor

[pbc243]

Is there like some special tool to get the damn o2 sensor out? Ive torched it, soaked it with pb blaster, and wd40.. damn thing just aint budging!


Ive looked at getting one of these things
any ideas?

 

[AndyB.]

https://www.amazon.com/gp/aw/d/B000NPUKIE/?tag=959media-20

 

[IIBRONCOS]

I got my O2 sensor started out with a small pipe wrench. Once it loosened a bit I used a 7/8" open end wrench.

 

[adsm08]

Jackhammer.

 

[pbc243]

Jackhammer.

Will give that a shot! Lmao

Sent from my Z837VL using Tapatalk

 

[pbc243]

https://www.amazon.com/gp/aw/d/B000NPUKIE/?tag=959media-20

I got one of those but don't have enough room to fit a socket wrench.

Sent from my Z837VL using Tapatalk

 

[pbc243]

I was wondering if something like this would be good
https://www.amazon.com/Neiko-03048A-Contour-Flexible-Chrome-Vanadium/dp/B002GQAYVQ/?tag=959media-20

since i aint got no room for a o2 socket thing cos of the little room

 

[swamprat]

I took the y pipe off of my BII to get the o2 sensor out. I still ripped the threads out of the pipe. had to tap a plug and weld it in.