BL Q's

[chrwilkins30]

Found a new 2 inch body lift on craigslist for $25 for a Chevy and it only has the blocks and bolts.

1. Do i need any sort of relocation brackets for anything.

2. What is the hole size that the bolts goes threw.

Thanks

 

[4.0B2]

for an 88 b2? i used peterbuilt gas tank blocks on mine.. so the blocks will be fine..the only thing i had to address on relocation or anything was- steering shaft, gas tank filler neck, and move the radiatior down. i cut the bottom radiator supports off and flipped them over, it happened to be the exact height i needed to drop the radiator.


and i don't remember what size bolt it was..

 

[chrwilkins30]

I will need a longer steering shaft with only 2 inch

 

[4.0B2]

It's telescopic... Kinda. I unbolted it from the firewall and did the lift then bolted it back up. Seems like I loosened something on the shaft itself to... But that was a long time ago.. I really don't remember.

 

[ChrisR1S]

You should be able to get by without the steering extension. I've done it on a newer ranger. A few others on the site have mentioned that they didn't use on either