Biggest Ranger In Jersey???

[4x4builder1]

been building my 94 extended cab for a few months now and its gone though alot of design changes at first I got a set of military xl 46's now im using 72" super ground drives full 4 link and a corvette LT1 stock for now untill everything gets worked out. Just using box tube to support the truck at ride height to make it easier to fab in the shocks. The frame supports to the drop tree will be fabbed after the rear end is up and I can cycle the suspension to see where i have room for the lower bars

 

[Sunk]

This will be one to watch....

 

[BlackBII]

I would have gone with a trellis style frame....but that's me.

It's not really my thing, however, it looks like it will really throw the mud.

I want some action pics/vids when this sucker is finished.

How much did the tires cost you? I'm just curious.

 

[crawlin91]

Now that will keep the fat girls at bay.

 

[kennykenny]

That is the biggest ranger I've seen in Jersey...I'm in Manahawkin where about are you?

 

[wizkid00104]

When you get it up... you don't mess around... That thing is bigger than Rosie O'Donnell!

 

[PickupMan04 FX4 L2]

Keep Us Updated!!

 

[KELLY88]

Whoa

That's just plain awesome! Got any more pictures?

 

[4x4builder1]

The tires where 500 for the first set with the rims but there date stamped 1972 and are a little dry rotted I can still get a good couple of years out of them but when I ran into a brand new set for 500 (no rims) I couldnt pass it up the crap on the front was the jack stand for tear down and installing the LT1 th400 keep in mind im 6'1" this thing is big

 

[4x4builder1]

this is the dash there is also a custom center console with 3 more gauges 2 cup holders and the b&m mega shifter

 

[wrecking-crew]

damn. where are you in jersey? i gotta see this truck in person

 

[4x4builder1]

Full 4 link qa1 1.25 heim joints with high misalighnment adapters 2" 1/4 wall square tube driveshafts will be equal length, front hydro steer the rear will be up within a week or so
http://i442.photobucket.com/albums/qq145/4x4builder1/frontrearinstalled007.jpg

 

[4x4builder1]

atco area

 

[4x4builder1]

 

[4x4builder1]

Oh for the guy that said it doesnt have enough power to get out of its own way once its finished and all of the bugs are worked out I will be making some real power with the LT1, and with 2 tcases 1 np200 and a m35 airshift in low low with around 750-800hp i plan on smoking the old set right off the truck but stock your right its going to be a snail