• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Best fuel injetors for 2.9?


ecgreen

Well-Known Member
Joined
Sep 21, 2018
Messages
720
City
Dunbarton NH
Vehicle Year
1989
Engine
2.9 V6
Transmission
Manual
Total Lift
3"
Tire Size
33
What brand do you guys use? I have my upper end apart and want to swap in new injectors while I'm at it.
 
I used ebay cheapos. 1 year in with no issue
 
Bosch is generally always a safe bet for fuel injectors. They make most OEM injectors anyway.
 
So whats with the pricing out there?!? At NAPA they want 50+ bucks a piece and other places its 50 for a set?
 
Buy a rebuild kit for them. Simple and easy, cheap to. Dirty
 
So whats with the pricing out there?!? At NAPA they want 50+ bucks a piece and other places its 50 for a set?

50 a set would typically be remanufactured or really cheap chinese stuff. 50 a peice would be OEM brand new ford injectors. Usually you can buy NEW not remanufactured bosch, denso, or other name brands for 20-30 a piece.

Like mike mentioned you can also get rebuild kits which will have new o-rings, filter baskets and pintle caps. A good option IF the internal solenoid is still in good condition. If the solenoid doesn't open or close all the way a rebuild kit wont fix them.
 
50 a set would typically be remanufactured or really cheap chinese stuff. 50 a peice would be OEM brand new ford injectors. Usually you can buy NEW not remanufactured bosch, denso, or other name brands for 20-30 a piece.

Like mike mentioned you can also get rebuild kits which will have new o-rings, filter baskets and pintle caps. A good option IF the internal solenoid is still in good condition. If the solenoid doesn't open or close all the way a rebuild kit wont fix them.

Any issues with remans?
 
You might won't to check your fuel manifold. It might be full of rust if your ranger set for a length of time. Rebuilding the ones you got will give you a re-manufactured injector. I have done this several times over the years. If the coil inside the injector works Rebuilding them is your best route. Dirty
 
I bought some rebuilts on ebay...they where useless. Couldn't even get the truck to idle. Swapped the old ones back in and bam, up and running again. Buyer beware
 
I bought some rebuilts on ebay...they where useless. Couldn't even get the truck to idle. Swapped the old ones back in and bam, up and running again. Buyer beware

I did the same thing although I got the name of the company and ordered them direct. Reman Bosch. They're garbage and leak like mad. And the company doesn't return phone calls or emails for their "lifetime warranty". Just put a new kit on what you have assuming the solenoid is working.
 
I have bought two sets of reman, blow matched, Bosch injectors from E-bay for my 4.0s. One set were yellow tops, one were reds. Both sets are over five years in with no issues so far.
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top