Bellhousing????

[3HO2]

Ok, Everybody
I need to know what bell housing I can use in my 302 swap. The T5 is out of a 90 or 93 mustang Ithink??? the bell housing(out 90 stang??) I have the hole that the fork that come straight out the leftside and would hit the frame rail. Im look for the one were the hole for the fork is slightly point downward so it aims towards or under the frame rails. my understanding is the 93 stang would work but I can't find any here.

my Truck
91 RANGER REG CAB
2.3L
MANUAL

If any more info needed please let me know.

Thaks Karl

 

[Teddyzee]

The T5 belhousings were the same until 1993. The clutch fork will not hit the frame.

The '94/'95 T5(5.0 and 3.8) belhousing has the downward tilt to it. This is not usable with an '83-'93 T5; at least, not easily. The sn95 belhousing longer than the Fox version.

The shift fork does not stick out very far, not even as far as the belhousing mating surface.

 

[3HO2]

hey thanks for the info!!!
time to move on forward Thanks again
Karl