bed liner for 91 ranger

[hunterleej]

I'm new here so please bear with me......I recently bought a 1991 Ranger for my 16 year old grandson......runs pretty good and although it is kinda beat up, my grandson loves it....We think if we could find a bed liner for it, it would really help the looks......don't know whether to go after a drop-in or spray on. Really don't know if I'll be able to find either....any advice will be greatly appreciated.

 

[3hokies]

Spray in is the way to go....for about $100 you can do it yourself with a kit you can get at most autoparts stores. it would be a good Saturday project. I used Herculiner to do the interior of my '88 and it went in easy. Sand the bed and roll it in...using 2-3 coats and it will last forever.

 

[hunterleej]

Thanks! What is the best way to sand it?

 

[hunterleej]

Spray in is the way to go....for about $100 you can do it yourself with a kit you can get at most autoparts stores. it would be a good Saturday project. I used Herculiner to do the interior of my '88 and it went in easy. Sand the bed and roll it in...using 2-3 coats and it will last forever.

Thanks...what is best way to sand?

 

[3hokies]

Power DA sander. Basically your just roughing up the paint so that the Herculiner will stick. Make sure you remove any nuts and bolts including the bolts that fasten the bed down if you ever want to get them off again. Check herculiner.com and all the directions should be there. There is a good how to here in the tech info section with pictures. http://www.therangerstation.com/Magazine/winter2008/durabak.htm