Battery harness different between 99 and 2000?

[Gotdsm95]

[Solved] Battery harness different between 99 and 2000?

So I just bought a 2000 ranger xlt stepside 4x4 and it needed a new engine. I have the engine pretty much all in but the harness from the battery is different from the donor which was a 99 2wd. Does someone have the pin out so I can wire this thing in correctly? I would just use the old one but the previous owner must have cut the power and ground because it is extreamly short. The first picture is from the donor and the second is the Original from the 2000.

 

[Gotdsm95]

So all it was missing was a yellow with blue stripe. Still not sure what everything does but it was just teed in the old harness so I depinned both harnesses and used the connector from the 2000 4wd and put it on the 99 2wd harness.

 

[RonD]

Yellow/white wire(s) are for Alternator

Yellow/blue is for starter relay from what I see on wiring diagarms
It runs from Starter Relay in engine fuse box to starter motor