axle swap(s)

[CreepyCrawler]

ill keep this short and sweet. i have a 96 ranger with 1/2 built axles as my truggy. also have a 91 stx...should i be able to directly swap the 1/2 ton setup from my 96 into my 91? questions relate to spring mount positions shocks etc.

 

[alwaysFlOoReD]

The 91 and 96 ranger frames and suspension points will be the same if stock.

 

[CreepyCrawler]

ok thanks

 

[85_Ranger4x4]

If it helps any I just put springs from a 2010 extended cab into my 1985 standard cab longbox... springs all mount the same.

 

[CreepyCrawler]

were those the rear leaf packs or front coils

 

[85_Ranger4x4]

were those the rear leaf packs or front coils

Rear leaves. The front coils are actually replacements for a 91-94 Explorer.

 

[CreepyCrawler]

cool deal. i may end up going to coilovers up front being as the motor is going to be swapped...sometime this century