A short vid of my 84 W/302......

[BLOODBANE]

I decided to start my Ranger today(its been a while) so I took a little vid of the engine(302). Its bored .060 over, '68 heads, Lunati VooDoo cam(351 profile),Headman shortie headers. The problem is, its a later year block, so there is less nickel content in the metal mix and has pin holes in the cylinders because of the severe bore. It only has 1k on the rebuild to boot. I have a '69 block, I just took out with a cracked ring(blow-by)that I'm getting ready to rebuild(all the parts above). Anyways heres the 60 ove engine.........
http://smg.photobucket.com/albums/v289/BLOODBANE81230/?action=view&current=MOV00275.flv
...........BLOOD.........

 

[Maverick]

I cant believe you run a carb with the elevation and the type of wheelin you do. Must keep things interesting.

 

[BLOODBANE]

Sorry not carb. Holley Pro-Jection. I used to run a old Q-jet and didn't have problems at all. I tried a Edelbrock "Off-Road", and it was total junk. Thats when I went to the Pro-Jection............