A/C clutch bearing

[snoman6115]

so im pretty sure my bearing or somthing is going out on my A/C pump, when the pump kicks in once in a while i can hear a chirp or slight squeak while the cycle is on and it goes away when its off. is there just a bearing i can replace on the pulley? or do i have to replace the whole clutch??

 

[pcollins]

its a loose/worn belt.

 

[BRUTUS_T_HOG]

the bearing only turns when the compressor is off.

are you sure its not the belt chirping from the extra load? or just normal compressor noise?

 

[Jspafford]

Mine squealed like hell and I feared the worst, then my fan clutch went out. After I replaced the fan clutch I had my hood open to see if all was well and kicked the A/C on. It was squealing, but I noticed the A/C belt bouncing around. I tightened it, and voila, my noise stopped and the A/C now works fine again.

Check the belt.

 

[snoman6115]

alright ill check and make sure all teh bolts are tight and look at teh belt