Welcome Visitor! Please take a few seconds and dcs8792
New Member
- Joined
- Jan 30, 2015
- Messages
- 1
- Transmission
- Automatic
I recently purchased a 1998 ford ranger, has a 2.5 4 cylinder with auto trans (believe its the 4r44e) ... so when I first bought it, it had some semi-hard shifting amongst 1st to 2nd & from park to reverse/drive... Now It seems that when I place it in drive, it does not start off in 1st gear, it feels as if its in 2nd gear; (however when I place it in 1/low It seems to work as normal and i could place it in 2nd and go from there?) I also notice from Park/Drive to reverse is very hard/rough... Anyone have any ideas on a fix or the problem??
Now it may not have any coinicidence but today I used seafoam through the brake booster line (and did it as the bottle stated) and cleaned the mass air flow sensor, it seemed right after this, the trans trouble began...
Now it may not have any coinicidence but today I used seafoam through the brake booster line (and did it as the bottle stated) and cleaned the mass air flow sensor, it seemed right after this, the trans trouble began...
