• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

97 ranger door panel removal power windows problem


nadsab

Well-Known Member
Joined
Sep 14, 2009
Messages
94
City
SE Michigan
Vehicle Year
1997
Transmission
Automatic
Hi,

Can anyone give me or point to info as to how to remove the drivers side door panel?

I am having trouble with my power window and need to access the motor - mechanism

Thanks.
 
take out all the screws you can find. should be two for the door handle. two at the bottom of the door. then one behind the door handle once you take it off. lift up to remove.

watch your wires.
 
Thanks much I got the inside door panel off. Is there a way to roll up the window before I service the motor?

I think either the motor is bad or something is stuck, when I push the power windowbutton I can hear the motor run and the window rattle but the window won't come up.

The problem is, the window goes up and down fine, but if I roll it all the way down, the window gets sometimes stuck, and sometimes when I turn off the engine and let the truck sit for a while the problem goes away and I can roll the window back up, but this time it won't go back up.

This problem only happens if the window is rolled all the way down....if I roll it down half way no problem...

So for now I just want to get the window up until I fix it
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top