96 Ranger - Brake lights out

[maldoror]

I replaced the bulbs and it's not that... thinking it's the fuse, but I don't know which fuse is which, I don't have a manual, and for some reason I can't find this info online. Could anyone point me in the right direction to find out which fuse I need to replace? Thanks in advance.

 

[exbass94]

I made this post in another thread, maybe it can help you:

Another possbility is the the brake light switch crapped out. The one on my '94 Explorer has crapped out about 3 times already. The good news is, it's a really cheap part and is real easy to replace as well. To check to see if yours is bad, look underneath the dash and you'll see a small wire harness going to your brake pedal. Unplug the harness from the brake light switch, take a scrap piece of wire, and stick each end of the wire into the plugs on the harness. This will complete the circuit and the brake lights should turn on. If they turn on, you'll know for sure that the brake light switch is bad. If they don't, then the problem is somewhere else.