94 Ranger

[JSerr5130]

I have a 94 Ranger-3.0/A4LD-2WD.The truck pulls hard to the right-camber is way off.I took it to a front end shop and was told that the I-Beam,torsionbar,and spindle are bent.Is there a front end that I can replace this with to get away from the I-beam suspension.Everyone I talk to says this is the worst suspension Ford came out with.
Any help is deeply appreciated.
Thanx

 

[92ranger2wd]

I have a 94 Ranger-3.0/A4LD-2WD.The truck pulls hard to the right-camber is way off.I took it to a front end shop and was told that the I-Beam,torsionbar,and spindle are bent.Is there a front end that I can replace this with to get away from the I-beam suspension.Everyone I talk to says this is the worst suspension Ford came out with.
Any help is deeply appreciated.
Thanx

Torsion bar? If your truck is indeed a 94 then you don't have torsion bars, you have coil springs. I'd be questioning the shop that told you that. If your I-beam and spindle are truly bent, you can find a replacement setup in a junkyard. Otherwise, start looking for a 98+ ranger that has the SLA IFS instead of the TTB.