94-ranger
New Member
Like the title says, i'm trying to figure out how to remove the lock actuator from my door. I have searched a ton but am only finding info for newer rangers. Also is there only one fuse for the locks? Thank you!
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
94 ranger door lock actuator removal
- Thread starter 94-ranger
- Start date
Mazda
Well-Known Member
- Joined
- Aug 8, 2007
- Messages
- 524
- Age
- 55
- City
- Temecula, CA
- Vehicle Year
- 94
- Engine
- 2.3 (4 Cylinder)
- Transmission
- Manual
It's a pain in the but no mater what year you have.
You need to remove the door panel. Snake your hand down to the lock actuator. The electrical plug will be on the outside of the door. Two wire connector.
When you see/feel where the lock actuator is on the door you will see a rivet that needs to be drilled out to remove it.
Then just remove the rod from the actuator and replace with a new one.
You need to remove the door panel. Snake your hand down to the lock actuator. The electrical plug will be on the outside of the door. Two wire connector.
When you see/feel where the lock actuator is on the door you will see a rivet that needs to be drilled out to remove it.
Then just remove the rod from the actuator and replace with a new one.
Last edited:
Similar threads
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
