94 mazda b3000 help!!

[sumnerwayne@ymail.com]

So i did the head gaskets on the ford vulcan 3.0 v6. Everything went good but i cant find where the hose goes from the drivers side valve cover and i have a stray plug black with a i think purple with yellow line and orange wires in the back by the o2 sensor connector. Any body point me in the right direction? Wish i had labled these.

 

[jeremysdad]

Valve cover hose either goes to pcv valve or a nub on the intake tube.

Stray connector either wasn't hooked up to begin with, or goes to the transmission?

All I have.

 

[sumnerwayne@ymail.com]

I found a digram that in the driver's side valve cover is the pcv valve and that the hose hangs freely? Still not sure on stray plug. Must connect to something though desperately needing someone with a 94 mazda b3000 to guide me possibly after new dizzy cap and rotor can run gel light if it sets it off but want to be sure on this hose also. Kicking my self for not labeling these, maybe I didn't label them because they weren't connected

 

[jarmo]

Ive got a 93 ranger 3.0. I'll go look at it and see if its simalar.Give me a few. its cold outside.

 

[jarmo]

ok. Mine has the small hose on the pcv going to the charcoal canister. The large hose goes under the upper intake below throttle body to a nipple. As far as the plug, I dont see one with 2 wires or same colors. One plug to dist., one to o2 sensor, and one to looks like harness to injectors. Can you tell what that plug is going to?

 

[sumnerwayne@ymail.com]

ok. Mine has the small hose on the pcv going to the charcoal canister. The large hose goes under the upper intake below throttle body to a nipple. As far as the plug, I dont see one with 2 wires or same colors. One plug to dist., one to o2 sensor, and one to looks like harness to injectors. Can you tell what that plug is going to?

Just an o2 sensor, the dist. And then its just hanging there black connector with orange wire and i think its purple mayve black or brown with a yellow line. Is it possible you can get pictures of the pcv hose where it connects? Im heading out to the truck in a few

 

[jarmo]

I've got a pic but can't get it to upload. I could maybe email them. Pm me with a number to text them to if you want. I'll look at the wires again and try to get pics of them.

 

[sumnerwayne@ymail.com]

I've got a pic but can't get it to upload. I could maybe email them. Pm me with a number to text them to if you want. I'll look at the wires again and try to get pics of them.

Found where the hose gos, just dealing with thus plug. Having a no start issue now will pm you