4.0 swap, fuel line problem...

[shadman]

Got both engines out of the 89 broncoii and 91 explorer. The fuel lines on the 4.0 engine both have the female connections; the fuel lines in the Bronco (coming fron the fuel tank) have one male and one female (I think the sending is the female, it is connected to the pressure regulator). What is the easiest way to solve this problem? Can I take the sending line from the explorer and use it??

Thanks!!
Shad

 

[disciplerocks]

Here is a link to my writeup.
therangerstation.com/forums/showthread.php?p=965336#post965336

Also at the bottom, you can see I posted 2 links for other swaps that helped me. If you look at the second one (not the Bronc's swap) and check out his photobucket, you can see how he did his.

 

[shadman]

Here is a link to my writeup.
therangerstation.com/forums/showthread.php?p=965336#post965336

Also at the bottom, you can see I posted 2 links for other swaps that helped me. If you look at the second one (not the Bronc's swap) and check out his photobucket, you can see how he did his.

Thanks for the reply. I ended up doing the fuel lines like yours; it turned out good. Now I need to change out the front seal in the transmission and the rear main in the engine, install the wiring harness, and drop in the engine....WISH ME LUCK!!!


Shad

 

[disciplerocks]

Good luck. It will be worth it.