4.0 OHV oil leak.

[91 blue ranger]

I just took out all the manifold bolts and pulled the hole manifold away from the filter bolt. It is still a little moist in that area but it might be coming from something higher up. Because something is leaking up there. I think it is coming from the intake gaskets. Hope this helps.

Im a little late to this post, but did the fix work? No leaks yet? ANd when you say you dropped the passenger side exhaust only, did you drop the y pipe and then take the passenger side manifold off?

 

[Shran]

You do not have to remove the manifold itself. I just removed the Y pipe when I did it and I'm not sure you really truly need to remove anything... it just depends on your tool selection. I think I used a 17mm flex head gear wrench. The through bolt is just in a very awkward spot.

 

[gdk771]

Can someone verify these are the correct o-rings I found here?

Do I need one of these?

RockAuto | All The Parts Your Car Will Ever Need

Auto Parts for Your Vehicle at Reliably Low Prices. Fast Online Catalog. DIY-Easy. Your Choice of Quality. Full Manufacturer Warranty.

www.rockauto.com

Is this one the same as the OEM one E9TZ-6749-A ?

Do I also need two of these?

RockAuto | All The Parts Your Car Will Ever Need

Auto Parts for Your Vehicle at Reliably Low Prices. Fast Online Catalog. DIY-Easy. Your Choice of Quality. Full Manufacturer Warranty.

www.rockauto.com

Thanks for anyone's help who had already replaced these.