302 Info

[dngrrngr07]

hey i have a 92 ranger 2wd that had the 4.0 in it. i plan on putting a 302 w/c4 in it, im trying to plan this out as best i can. basically the 4.0 v6 an tranny are gone and all the stock harnesses and wiring is left. what i wanna know is what should go and what i should keep to make this conversion go as slick as possible, i would like to try to use most the stock gauges if any of that is possible. thanks

 

[bobbywalter]

eec computer and engine harness can go...but you may want to keep it handy so you can use the ends that plug into the interface harness to hook up the gauges and run key powers out to whatever system your running/carb or efi..