302 in 93 Ranger

[93'Stranger]

Just got a 302efi from 91 f150 plan on putting it in my ranger, with either a t5 or c4 tranny, 8.8 rear end and some traction bars, ofcourse i know i need a bigger radiator, and motor mounts and what not but could the ranger powersteering pump and that all hook up fine to the 5.0? any tips or comments would be great

 

[gearhead1]

Go to the tech library.

Accessories:

You can use a factory V6 Ranger alternator with a V8 bracket and adjuster. The alternator-mounting bracket is part # E7TZ-10A313-B and the adjusting bracket is E6AZ-2888-A. The stock power steering pump can be used on a V8 with the correct brackets found on many Ford passenger cars. The power steering bracket is part number E7TZ-3C511-A. You can use your original temperature and pressure gauge but will have to re-calibrate your factory tachometer. Contact Specmo Enterprises (810-398-9103) about recalibrations. You can use your air conditioning with the proper V-8 brackets. The wiring will need to be extended and the condenser will have to be relocated to the front side of the radiator.

 

[93'Stranger]

i appreciate the help i payed 80 bucks for the motor and it has zero cylinder wear its time to start rebuilding it