- Joined
- Sep 14, 2020
- Messages
- 544
- Points
- 601
- City
- usa
- Vehicle Year
- 99
- Engine
- Transmission
- Manual
- Total Drop
- lower
- Tire Size
- 235 on 15s
I went from 99 4cyl 5spd reg cab to 98 expo 5.0 w/ foxbody t5(from mdl), plenty of aftermarket shifters/boots to make it work and work good. Just need to trim floor some. Clutch setup I used above mentioned stuff. My stock driveshaft was really close to working, but was pretty much bottomed out, I also lowered truck. local shop shortened for $150. Running expo 8.8. My swap took about 8 months. All the info you need is on this site. Myself n others will answer questions along the way if needed. Get wrenching.
