• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

3" Body Lift


they will molest you. i believe it says 7 hours to do yourself if im right. im sure a shop would love to charge you double what u paid for the parts. only the front end is the pain. i have to replace my front(by radiator) body mount... wisdh i knew how to weld lol.
 
just go to tech section and go look at the write up, if you really dont feel confident maybe a member local to you could help for less? cause im sure a shop would rape you...
 
We had to replace my Core (Radiator) Support in the front because both front mounts were shot on the bottom and the metal disentegrated from the rust and twisting going crawling.

10 hours on a saturday to pull the fenders off, remove the radiator, separate the old support and weld the new one in.....

4 hours sunday to remove all the old body mounts and do the 3 inch lift and new mounts, and reattach the fenders and radiator.

best thing is grab a friend or two and follow the instructions. it's not too hard to do, and you dont need to rush it.
i would suggest replacing the bosy mounts while you do the lift. your already in there taking the old ones out.
 
And check put bolts some may snap right in half on old vehicles so may want to make sure to Chechen so your not caught with one body mount missing a bolt
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top