red_ranger93
Well-Known Member
i have an axle from a 3.0l standard transmission what gears would be in
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
3.0l standard rear axle
- Thread starter red_ranger93
- Start date
check the axle tag.
But most likely 3.55's or 3.73's.
If there's no tag....take the cover and on the Ring gear there will be the ring gear and pinion gear teeth counts. Divide....
But most likely 3.55's or 3.73's.
If there's no tag....take the cover and on the Ring gear there will be the ring gear and pinion gear teeth counts. Divide....
- Joined
- Jul 15, 2008
- Messages
- 799
- Age
- 37
- City
- Sutersville Pa
- Vehicle Year
- 97,79,00,72,71
- Transmission
- Manual
My 3.0 5spd truck has 3.73s
red_ranger93
Well-Known Member
i was just curious if the gears were different then my 2wd ranger it has a 4.0l with an auto. the axle that i was wondering if its worth puttin in is from my 4wd 3.0l ranger with a standard tranny.
thanks alot
dan
thanks alot
dan
- Joined
- Jun 1, 2001
- Messages
- 7,897
- Age
- 64
- Vehicle Year
- 1987... sorta
- Transmission
- Manual
a 3.0 Ranger will have a 7.5" rear axle with 3.45, 3.73 or possibly (remote) 4.10's
a 4.0 Ranger can have anything from 3.27's to 3.55's, 3.73's or again, 4.10's (rare) but WILL have an 8.8" axle.
You really wouldn't want to ut a 7.5" with 4.10's behind a 4.0.
AD
a 4.0 Ranger can have anything from 3.27's to 3.55's, 3.73's or again, 4.10's (rare) but WILL have an 8.8" axle.
You really wouldn't want to ut a 7.5" with 4.10's behind a 4.0.
AD
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
