2010 2wd Lift help

[Aggiefan06]

I have a 2010 Ranger I am wanting to do a small lift on it to fit some bigger tires. I am a chevy guy and only know about torsion bars and have a 06 sierra thats fast, lowered, cammed and with AWD and I got this as a daily Driver and am clueless about coil springs.

So found some things. I wouldnt think the 09 and 2010 models are much different suspension wise. I found these on ebay, just exactly what I was looking for. I just got a free set of BFG mud terrains for it about 2 sizes bigger than stock so It will be going up a bit.

2" Rear shackle lift kit
http://cgi.ebay.com/ebaymotors/1998-200 ... 2094wt_958


Coil Spacer kit:
http://cgi.ebay.com/ebaymotors/1998-200 ... 3591wt_958

Note above: Im going to get the spacer thats right at 2". He has 3 choices of spacers and I dont want to go up too high.

As for shocks, Do I need them or anything else? Ive looked everywhere and all I can find are shocks for the torsion bar setup rangers. I wonder if bilstein can make some or if someone already has?

 

[bcost882]

well the posting for the spacers was removed but look for the steel spacers i have a 00 and it is the same suspension mostly as the 2010 model. don't go over 2.5in. cause then you will need a lift upper a-arm. shackles might not be enough put em on and check out the stance and see if that is what you want. you will prolly have enough room for 30s or 31sMAYBE......... measure and then do tires so you can be sure to have enough room. I didn't bother to ask if you have a 2wd but hopefully since you are asking about coil spacers you actually looked. if you can find 98 and up lift spindles those will also work with your suspension giving you enough room for 32s anything else feel free to ask and welcome to our community

 

[Ranger Sport Honduras]

with a 2" lift u can fit 31"s with no problem
stay with a 2" spacer for the front
bcost882 covered it for ya