Welcome Visitor! Please take a few seconds and henchman
Member
- Joined
- Jan 4, 2012
- Messages
- 10
- Vehicle Year
- 2002
- Transmission
- Automatic
I am looking for frame measurements for a 2006 FX4 Level II. Truck hit a guard rail and tore off the lower rad support and skid plate, broke the driver's side spindle and tie rod.
I was told by the body shop that there is significant damage to the frame, especially in the area of the cross member. A body man wanted to buy the truck if it wasn't being fixed. so I don't know if he made it sound worse than it is. There is no damage to the body, panels line up, doors open and close properly.
I have measured 26" at the cross member (under lower pulley) inside to inside of frame. I have also measured front of frame, center to center and outside to outside.
If anyone can send measurements, it would be greatly appreciated.
I was told by the body shop that there is significant damage to the frame, especially in the area of the cross member. A body man wanted to buy the truck if it wasn't being fixed. so I don't know if he made it sound worse than it is. There is no damage to the body, panels line up, doors open and close properly.
I have measured 26" at the cross member (under lower pulley) inside to inside of frame. I have also measured front of frame, center to center and outside to outside.
If anyone can send measurements, it would be greatly appreciated.
