Larmatis
New Member
Went for an oil change today the guy pulled out the entire tube cannot locate where it goes back in any help ?
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
2005 Ford Ranger 4.0 4x4
- Thread starter Larmatis
- Start date
Never looked at the 4.0l SOHC but it uses same block as 4.0l OHV
So on driver side there is a hole just above where oil pan bolts to the block and its behind the motor mount so can be hard to see
OHV picture here: https://farm4.staticflickr.com/3237/2344404608_f35c9537e4_z.jpg
The tube should be bolted to the head, but at a different place on the SOHC because its a different head
So on driver side there is a hole just above where oil pan bolts to the block and its behind the motor mount so can be hard to see
OHV picture here: https://farm4.staticflickr.com/3237/2344404608_f35c9537e4_z.jpg
The tube should be bolted to the head, but at a different place on the SOHC because its a different head
1990RangerinSK
Well-Known Member
- Joined
- Oct 5, 2016
- Messages
- 2,346
- City
- Saskatchewan, Canada
- Vehicle Year
- 1990
- Engine
- 2.9 V6
- Transmission
- Automatic
You sure that's not left? It looks like left to me.
- Joined
- Mar 31, 2019
- Messages
- 814
- City
- FL
- Vehicle Year
- 2001
- Engine
- 4.0 V6
- Transmission
- Automatic
- Total Lift
- 0
- Total Drop
- 0
- Tire Size
- Just the right size to touch the ground.
It's all about perspective.
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
