The center lights which show TEMP and FUEL are out. I took apart the cluster and removed the bulbs and they are ok. I put them back in and then half of the Speedo went dim. I removed the Speedo bulb and it looked ok. I put the bulb back in and the entire Speedo went dim. The TEMP and FUEL lights suddenly turned on.
So I took out the entire cluster and removed the board and cleaned up all of the contacts to make sure they were clean. All bulbs looked okay.
I then put the cluster back in and tested again. I turned on the hazard lights and the left signal quit working. A second later it came back on. I checked the bulbs and they are tight.
The Speedo is fully lit now and the TEMP and FUEL are out again.
The Bright indicator stopped working and so I wiggled that bulb around but to no avail.
I think the board is shorting somewhere and may need replacement.
The question is : When I replace the cluster, what about the Odometer?
Thanks for reading
So I took out the entire cluster and removed the board and cleaned up all of the contacts to make sure they were clean. All bulbs looked okay.
I then put the cluster back in and tested again. I turned on the hazard lights and the left signal quit working. A second later it came back on. I checked the bulbs and they are tight.
The Speedo is fully lit now and the TEMP and FUEL are out again.
The Bright indicator stopped working and so I wiggled that bulb around but to no avail.
I think the board is shorting somewhere and may need replacement.
The question is : When I replace the cluster, what about the Odometer?
Thanks for reading