2001 Ranger XLT HD Motor Mounts

[Newb Ranger Guy]

Hi all! I am new to the ranger world and I need motor mounts for my 2001 Ranger XLT 4.0 with Torsion bar suspension. I was wondering if anyone knows of any polyurethane mounts for this truck or if anyone can make some? Thanks in advance for any help.

 

[JOLENE_THE_RANGER]

http://autofab.com/i-9609278-ranger-edge-2000-up-2wd-4wd-truck-4-0-sohc-v6-motor-mounts.html

 

[Newb Ranger Guy]

http://autofab.com/i-9609278-ranger-edge-2000-up-2wd-4wd-truck-4-0-sohc-v6-motor-mounts.html

I have looked at these, but they don't look like they will work. I do not have an edge, mine is just an XLT.

https://www.summitracing.com/parts/ani-2642/overview/make/ford/model/ranger

These are what i keep finding for my truck.

 

[holyford86]

those autofab mounts will work on an xlt 4x4 as well, the edge trucks are unique in that they always used a torsion bar front suspension whether 4x2 or 4x4. Regular 4x2 trucks use a coil spring front suspension and those mounts will not be compatible with that suspension design.

 

[Newb Ranger Guy]

those autofab mounts will work on an xlt 4x4 as well, the edge trucks are unique in that they always used a torsion bar front suspension whether 4x2 or 4x4. Regular 4x2 trucks use a coil spring front suspension and those mounts will not be compatible with that suspension design.

So the XLT has a plate that bolts to the motor? If so, that makes more sense as to why they didn't look like they were going to work. Thanks for the help.