• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

1999 3.0 ffv running rough


walleyenights

New Member
Joined
Sep 23, 2007
Messages
1
Vehicle Year
1999
Transmission
Automatic
My1999 ranger 3.0 ffv is running rough. replaced the plugs and wires still running rough check the coil it is ok !! had advance auto run test and it came back with cylinder 4 misfire what should i do next?
 
make sure you have injector pulse to the injector? if not, see if it's an injector driver problem at the PCM< wiring etc. if you do, check compression, make sure you have spark to the cylinder. If all is ok, take it to a ford dealer and have them do an injector flow test and see if you have a bad or plugged injector.
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top