1998 Ranger vs Chrysler 300 Rims

[cherokee]

I have a 1998 Ranger 4x2 4.0 and need new tires and rims. I hate these 14's that are on here now. My question for you folks out there is.. Will these rims from the Chrysler 300 (2006) work? I was also told that Jeep Rims work on Rangers as well.. If you have any constructive advise, please let me know.

Thanks

 

[martin]

The issue with jeep wheels is usually the centre hole on the mags, and only relevent if you have 4 x 4, the hubs don't go through the hole. If you have a 2 wheel drive it should not be a problem. It should also be noted that some of the later jeeps have a different bolt pattern. Regarding the 300, I have no idea what the bolt pattern is on them.

 

[snomaker321]

the ranger and jeep wheels use a 5x4.5 or 5x114.3 bolt pattern. The chrysler 300 uses a 5x115. It maybe be close enough, but it also might not. Might wanna test fit them and drive around to check for vibration etc if possible. Also not sure on the backspacing ton them