Welcome Visitor! Please take a few seconds and edoebler
New Member
- Joined
- Jul 26, 2012
- Messages
- 1
- Vehicle Year
- 1996
- Transmission
- Manual
I have a 96 ranger with 4.0 and 4x4. The speedomer has quit working and I have:
Replaced VSS on transfer case
Replaced spedometer in cluster
Replaced senesor on top of rear end
When it is cold out, the speedometer will work for a mile or so and then quit.
I tried checking the sensor with a drill and watching the speedomer but that has proved nothing. I am at my wits end trying to figure this out and the truck is due for inspection by the end of the month.
Could the problem be with the gear in the transfercase?
I have found it almost impossible to track wiring because of everything being in a harness.
Any help is greatly appreciated. I have learned alot from this forum already and this is my first need for help! Please help.
Thank you,
Erich
Replaced VSS on transfer case
Replaced spedometer in cluster
Replaced senesor on top of rear end
When it is cold out, the speedometer will work for a mile or so and then quit.
I tried checking the sensor with a drill and watching the speedomer but that has proved nothing. I am at my wits end trying to figure this out and the truck is due for inspection by the end of the month.
Could the problem be with the gear in the transfercase?
I have found it almost impossible to track wiring because of everything being in a harness.
Any help is greatly appreciated. I have learned alot from this forum already and this is my first need for help! Please help.
Thank you,
Erich
