1995 Ranger XLT 2WD front end rebuild

[CajunPwnStar]

Got a used truck for work and it definitely needs new ball joints and an alignment. Since I'm going to have it apart up there, I was wondering what else I should change/inspect. Not a full rebuild, but mainly bushings. Also going to replace the shocks all the way around.

 

[XLTsplash]

The twin I beam front end is a good durable set up. I would just replace what's loose along with a alignment and new shocks like you were talking about and you should be good for many more miles.

 

[CajunPwnStar]

I jacked it up and all of the bushings are still nice and snug, so I just greased it up. Getting the Moog ball joints in tomorrow and going to get the shocks ordered.