1994 ranger lift

[taylor27]

I have a 94 Ranger with a 3" BL, 2.5" leveling kit in front and 2" blocks in rear with 1" shackels with 32x11.5x15 BF tires, i wanted the truck to sit alittle higher in the rear becasue i carry around heavy loads every now and then but im trying to lift the front alittle more now and wanted to know the best route to follow, i was looking at extended coils but i dodnt know what else needed to be changed for them to work properly

 

[84stealthranger]

put a add a leaf in there. or swap some explorer leafs in with ur ranger pack.

 

[taylor27]

i wanna make the truck higher in the front, sorry if my post isnt clear

 

[Bennybooster]

drop pitman arm radius arm drop brackets, and the ttb drop brackets

 

[rkneeshaw]

drop pitman arm radius arm drop brackets, and the ttb drop brackets

with 4" coils.

This route is the only way to go for you since you already have 2" coil spacers, you need the drop brackets. You'll need new longer shocks too I think

 

[Lrpalo]

Dont forget a pair of camber bushings or you will roast the front tires right off