Welcome Visitor! Please take a few seconds and Kinglowboy
New Member
- Joined
- Apr 29, 2015
- Messages
- 2
- Vehicle Year
- 1994
- Transmission
- Manual
Ive been reading these forums for a while and they have kept my ranger running up to now. I have a 1994 Ranger 4wd 5 speed. The computer went bad and I put a new one in and now it wont start. Engine turns over but no go. Ive checked fuel fire and air . Its getting all three but it just wont try to fire. Its driving me nuts as right now its my only mode of transportation. Anyways I know this sounds stupid but im not hearing something under the hood that I use to. I think it was the fuel injectors noiding but now its quiet as can be. Ive done voltage checks and its reading fine. I know that the ground is controlled by the computer and Ive been trying to find a schematic with the wire pinouts for the injectors but not having much luck on that front. The computer was replaced cause the vehicle was having hiccups and issues before I parked it and it eventually went dead. She currently has about 600k miles on the body but its one of those situations that I just kinda like the truck and shes never left me stranded anywhere but home. Any help would be appreciated as Ive searched these forums pretty good and I found similar issues but they all couldnt get any codes from the pcm. Which i can pull codes but everything it sends is where the engine is cold. Thans in advance.
