Welcome Visitor! Please take a few seconds and luke_brant
New Member
- Joined
- Apr 16, 2014
- Messages
- 1
- Vehicle Year
- 1993
- Transmission
- Manual
i have a 93 ford ranger 2.3l 4 cylinder. when i recently purchased the truck 4 of the 8 plugs on the coil packs had no spark. so i had autozone test my ICM (ignition control module). it failed. Note: the truck still ran and i was driving it up until the time i decided to change the ICM.
i purchased a used ICM from a local salvage yard and had it tested at autozone and it passed. so i replaced the old one with this one. i tried starting and all it did was crank with no spark. then i tried to put the old one back on, now neither is allowing my coil packs to send spark . any help?
i purchased a used ICM from a local salvage yard and had it tested at autozone and it passed. so i replaced the old one with this one. i tried starting and all it did was crank with no spark. then i tried to put the old one back on, now neither is allowing my coil packs to send spark . any help?
