tim
Member
I have a 1992 ranger 4x4 with a 2.9 auto OD I would like to make it a stick what parts do I need like what tran and will my t case that I have work
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
1992 ranger
- Thread starter tim
- Start date
- Joined
- Aug 8, 2007
- Messages
- 7,916
- Age
- 37
- City
- Terrace, BC, Canada
- Vehicle Year
- 1991
- Engine
- 4.0 V6
- Transmission
- Automatic
- Tire Size
- 40s
You will need a mazda m50d manual transmission from either a 2.9 or a 4.0L along with the pedals and the pedal assembly.
cocoasranger
Well-Known Member
Also flywheel and bolts, pressure plate and disk,manual block off plate and starter, pilot bearing (may need bearing collar also), hydraulic clutch master/line/reservoir, and a manual computer (unless you are able to use the existing one). A couple of the top trans bolts are different also- I would scarf up the ones off the stick trans when you pull it.
- Joined
- Aug 6, 2007
- Messages
- 6,520
- Age
- 49
- City
- Berrien Springs, MI
- Vehicle Year
- 2022
- Transmission
- Manual
- My credo
- If you can't go through it or around it, then go over it.
beings how you are taking the transmission out anyways, might as well do the 4.0L flywheel and starter upgrade as well.
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
