For Sale 1992 4.0 V6

[1BadRS]

I had picked up a 1992 Explorer to do the 4.0 swap into my 84 Bronco II, but decided to just stick with the 2.8 carb setup. The motor is pretty much as complete as you can get with radiator, hoses, fan. It has the front accessories with belt and exhaust manifolds all the way to the y pipe and converters.

Looking for a local pickup in Pinehurst, NC.

$500 or will trade

 

[1BadRS]

I will part out the motor as well and can ship parts if need be.

 

[thcscubajohn]

Is the harness for sale?

 

[1BadRS]

Sure, I just took everything apart. Sent you a message

 

[sumncguy]

Im in NC 27541 .. I have a 92 Ranger 4.0l 4x4 auto .. this is what I need ..

Need a power steering pump.

I need the two rubber gaskets from the hard black hose running from the throttle body to the Air cleaner if in good shape. Mines crumbling.

Need a gray drivers side door panel with a good arm rest and switches electric windows.

Need a black drivers side handle in and out if in good shape.

Need the two hoses off the evap canister if in good shape. Mine are crumbling.

Might need a tranny, a4ld 4x4 ... and I may eventually be looking for working 4x4 components.

Thanks

 

[thcscubajohn]

I'm back again, can I buy the fuel line from the filter to the fuel rail?

 

[dmperkins01]

driver side valve cover? mine is needing replaced

 

[Shadowrider6661]

Do you still have the heads, rocker arms, and pushrods for it ? If so, how much ? I have no problem paying for shipping if you're willing to ship.

 

[cee21]

What gears are in the axles? Is it 4x4?

 

[stamina]

I had picked up a 1992 Explorer to do the 4.0 swap into my 84 Bronco II, but decided to just stick with the 2.8 carb setup. The motor is pretty much as complete as you can get with radiator, hoses, fan. It has the front accessories with belt and exhaust manifolds all the way to the y pipe and converters.

Looking for a local pickup in Pinehurst, NC.

$500 or will trade

i’m in wilmington nc, do you have the dash harness and a cylinder head? very much needed.

 

[stamina]

I had picked up a 1992 Explorer to do the 4.0 swap into my 84 Bronco II, but decided to just stick with the 2.8 carb setup. The motor is pretty much as complete as you can get with radiator, hoses, fan. It has the front accessories with belt and exhaust manifolds all the way to the y pipe and converters.

Looking for a local pickup in Pinehurst, NC.

$500 or will trade

you still got that thing dude ? i live in wilmington

 

[1BadRS]

I have some parts from the motor left, but not the complete assembly. What are you looking for?

 

[stamina]

I have some parts from the motor left, but not the complete assembly. What are you looking for?

do you have the short block and is the short block good?

 

[1BadRS]

no sorry, block and heads were scrapped.