1988 Ranger Running Front Brake lines

[atvkid4eva]

Hey should there be a junction box on my 88' ranger to split the brake lines from the master cylinder? the previous owner ran new lines and just used a "T" to split the front lines and it is leaking and is a hack job so im replacing and he ran the rear line straight from the master cylinder..and i dont see a valve on the frame for the lines to run to? what would be my best option on splitting the front brake lines to each wheel? these is no ABS. thanks guys.

 

[Sasquatch_Ryda]

The line should go from the master down to the flex line on the drivers side (there will be a block with 2 ports on it) and then from the drivers flex line over through the engine crossmember and to the passenger side flex hose.

 

[atvkid4eva]

ok so if the block is no longer there on the drivers side with the two ports could i just run a "T" fitting to split the two? who knows what happened to the original fittings, but i am running extended lines from the tech library anyway.