1988 B2 fuel pumps

[B2dangerous]

Can the 88 be made to run with just one in-tank pump, or does it need both to run? would like to do away with frame mounted pump if possible.

 

[Bronco_Chuck]

You need them both the in tank pump is low pressure meaning it alone will not have enugh pressure to the injectors.

 

[B2dangerous]

Thanks, I was afraid of that. Just picked up an 88 that hasn't run since 2000 and both fuel pumps are out in it.

 

[2ranger87]

I would think that you could use a pump/sending unit from an '89 B2 (which is a high pressure pump) and delete the frame rail pump on yours. I have an '87 and a '90 B2, and they both appear identical at the tank end.......

 

[HndMeDnBroncoII]

dont forget youd have to patdch the line on the rail or pickup different fuel lines
and check ur inertia switch the tech section has an article about it

 

[B2dangerous]

Thanks for the replies, ended up replacing both pumps today and it fired right up.
Parts store didn't have the frame mounted fuel filter so have to order one.

 

[Bronco_Chuck]

Good to hear you got it up and running.